Taylors Doors manufactures Maxi Single and Double Leaf Hinged Fire Resistant doors with Mullion Frames utilizing a vermiculite core (TVC40) which is stable and contains no asbestos or mineral fibres.
2 Single Leaf Doors with Mullion Section
Single Leaf and Double Leaf Doors with Mullion Section
2 Double Leaf Doors with Mullion Section
Maxi Fire Resistant doors are edged with an internal (nominal) 10mm solid timber edge rail to all four (4) sides with a selection of door facings dependent on the finish required and/or fire rating required.
Our standard range of door facings include;
- Paint Grade Ply (sheet thickness 3.6mm)
- Duracote Tempered Hardboard (sheet thickness 3.2mm)
The core used in the manufacture of our Maxi Fire Resistant doors is 38.5mm thick.
Dependent on the facing required the finish thickness of the Maxi Fire Resistant door will vary.
The following table outlines the approximate finished door thickness for a Maxi Fire Resistant door based on the standard facing options.
| Door Type | Facing | Approximate Thickness (mm) |
|---|---|---|
| Maxi | Duracote | 44.9 |
| Paint Grade Ply | 45.7 | |
| MDF (4mm) | 46.5 |
Maxi Single and Double Leaf Hinged Fire Resistant doors with Mullion Frames are special order items and not available to order on line. Get a Quote
The following table lists product limitations in accordance with AS1905.1-1997 based on standard configurations.
| Available Sizes in accordance with AS1905.1-1997, frame and mullion member must be back filled. | |||
|---|---|---|---|
| Wall Type | Maximum Leaf Height | Maximum Leaf Width | Maximum FRL |
| Plasterboard | 2400mm | 1200mm | ---/120/30 |
| Masonry | 2400mm | 1200mm | ---/240/30 |
Should you require, the following optional extras are available;
- Vision panels
- Air Grilles
- Seal provisions (routed provision in the bottom of the door)
- Tunnel lock provisions (a drilled cable transfer hole through the width of the door leaf for electric locks)
- Stainless steel kick plates
- Steel sheet and capping
- Non combustible backing